City Steel
Heat Treating offers complete Induction Heating Treating Services.
We have a full complement of Induction Heat Treating equipment including induction units ranging in power from 1KW
up to 100KW. We have the ability to quench in oil or water.
We also have all the necessary support equipment
that can position, rotate, or scan the parts being heated as required, and our own machining area to provide induction coil
and set-up tooling fabrication for quick turn-around.
The primary advantage of Induction Heating
is that heating of only selected areas of the parts can be achieved. This provides
for selective heat treatments including hardening, surface hardening, and annealing.
In Induction Heating, a high frequency current is passed through
a coil surrounding the part to be treated – resulting in heating by electro-magnetic induction. The heat-affected zone
can be controlled by the configuration of the induction coil, the orientation of the part in the coil, the frequency and amount
of power used, and by rotating or scanning the length of the part. The time required to heat the part to obtain a complete
austenitic transformation is brief, typically only a few seconds for a surface hardening application. Once the part has been heated, it can be quenched or slow cooled as required by the particular heat treatment.
***************************************
Serving Santa Fe Springs, California and the surrounding Southern California communities
with Heat Treating
Services.
Altadena, Anaheim, Arcadia, City of Industry, Corona, Cost Mesa, Cypress, Downey,
El Monte, Fontana, Garden Grove, Glendale, Glendora, Hollywood, Huntington Beach, Inglewood, L.A., LA, Long Beach, Los Angeles,
Norwalk, Ontario, Paramount, Pomona, Riverside, San Fernando, Santa Ana, Santa Fe Springs, Santa Monica, Torrance, Upland,
Van Nuys, Whittier
|
|
